X'inhu permezz ta 'injezzjoni

iffurmar injezzjoni hija proċess ta 'manifattura li hija ideali għall-produzzjoni prodotti identiċi u konsistenti ħafna fi kwantitajiet kbar.

L-industrija iffurmar injezzjoni qed tikber malajr u fl-2016, l-industrija globali iffurmar injezzjoni kien stmat li jkunu ivvalutat bi USD 283,540,000,000.

Polypropylene kienet l-materja prima aktar użati li jammontaw għal 36% tad-domanda totali, segwit minn ABS bi 25% tad-domanda fl-2016.

Il-Paċifiku Asja ddominat id-domanda globali għall-injezzjoni iffurmat prodotti u tinġemgħa 37% tad-domanda totali fl-2016.injezzjoni vetrina iffurmar

Ħafna prodotti li huma komunement użati fil-ħajja ta 'kuljum huma manifatturati bl-użu tal-proċess iffurmar injezzjoni. iffurmar injezzjoni hija proċess ta 'produzzjoni ideali għall jkollna prodotti ta' kwalità għolja b'rati ħafna kost-effettivi.

 

Vantaġġi ta 'molding injezzjoni

industrija iffurmar injezzjoni qed tikber b'mod esponenzjali. mudellar injezzjoni qed tintuża dejjem iktar fil-produzzjoni ta 'prodotti multipli.

Il-proċess ta 'manifattura għandha ħafna vantaġġi fuq metodi oħra. Xi wħud mill-aktar benefiċċji importanti ta 'użu mudellar injezzjoni biex jimmanifatturaw prodotti huma kif ġej:

 

effiċjenza

Injection molding is a very effiċjenti manufacturing process. The process is highly automated and controlled by robotics and machines which can be very easily controlled and managed by an operator.

The manufacturing process is very repeatable and reliable which can be used to produce large quantities of products which are identical and consistent.

Due to the highly consistent manufacturing process, it is much easier to ensure consistency in products and brands. Injection molding provides an almost mingħajr żbalji proċess ta 'manifattura.injezzjoni vetrina iffurmar

The products are manufactured in very less time. Specific production times depend on the complexity and intricacies of the design but on an average 15-20 seconds is the time between each cycle.

 

Prodotti High-Kwalità

Il- kwalità tal-prodotti huwa benefiċċju ieħor ta 'mudellar injezzjoni. Il-prodotti manifatturati jkunu ħfief u durabbli.

Prodotti manifatturati bl-użu permezz ta 'injezzjoni mhumiex ngħaqdu jew iwweldjati, pjuttost huma magħmula minn moffa wieħed. Dan iżid il- -impatt tar-reżistenza u tensjoni saħħa tal-prodotti.

 

ispiża effettiva

Manifattura li jużaw mudellar injezzjoni hija ħafna kost-effettiv. Il-parti l-kbira mill-ispejjeż u r-riżorsi huma kkunsmati matul prodott tfassil u ddisinjar ta 'l-imwarrbin produzzjoni.

Ladarba l-prodott u l-forom ġew imfassla, il-proċess ta 'manifattura huwa mgħaġġel ħafna. kwantitajiet kbar ta 'prodotti jistgħu jiġu manifatturati fil-ħin ħafna inqas jużaw l-istess moffa ripetutament.

This brings down the overall cost of manufacturing drastically, which makes injection molding a highly cost-effective manufacturing method.

 

The flexibility of Using Raw Materials

Manufacturing using plastic polymers is restrictive as products need to be produced using only a single plastic polymer.injezzjoni vetrina iffurmar

However, injection molding provides the flexibility to manufacture products using a kombinazzjoni of plastic polymers. They can select the best combination of raw materials which will provide them with the desired quality of the product based on its intended use.

In addition to choosing a combination of plastic resins for production, manufacturers can also choose a wide range of colors using injection molding.

 

Eco-Friendly

Injection molding process has changed and evolved considerably over time. The industry is becoming eco-friendlieru sostenibbli . The latest production processes lead to very less scrap plastic during production.

The new machines are also very energy efficient and use at least 20-50% less energy than the older machines.

 

Common Application for Injection Molding

Injection molding is being used in manufacturing multiple products which are commonly used by us in our daily lives. The products manufactured by injection molding are of very good quality, consistent, and highly durable.

Some of the most common applications of injection molding are discussed below:

 

Mezzi mediċi

Medical devices are being increasingly manufactured using the injection molding process. The medical device manufacturing industry using injection molding is growing steadily at 6% annually.injezzjoni vetrina iffurmar

In 2012, more than 755 million pounds of plastic was consumed for manufacturing medical devices and equipment using injection molding. The products manufactured are of very high quality, precise, and offer improved performance.

The products are manufactured in very less cost which makes it possible to dispose of them after using and avoid reusing them after sterilization. This reduces the risk of infection and preparation time of the devices.

 

Automotive Parts

Injection molding is very commonly used for manufacturing high-quality automotive parts. It is estimated that about 90% of the parts used in cars are manufactured using injection molding.

The injection molding process helps to manufacture high-quality parts which are highly precise and consistent which is very important for the automotive industry for ensuring safety.

These parts are also lightweight which helps to improve fuel efficiency. The parts are very strong and durable which improves the overall safety of the passengers.

 

Daily Use Products

Many of the commonly used products used in our daily lives are manufactured using injection molding. Products like plastic bottles, plastic containers, toys, furniture etc. are manufactured by the injection molding process.injezzjoni vetrina iffurmar

The products manufactured are lightweight, durable, and impact-resistant which ensures their longevity. The application of injection molding in manufacturing daily use products is increasing steadily.

 

Consumables and Electronics

The consumables and electronic items used commonly are also widely manufactured using the injection molding technology.

Electronic products and accessories like cell phones, cell phone accessories like casings, earphones, tablet covers, camera body, remote controls, electronic parts for TVs and computers etc. are manufactured using injection molding.

These products can be manufactured in bulk with high consistency by injection molding. Due to the flexibility in choosing a combination of plastics for production, these products are very strong and durable.

 

ippakkjar

Imballaġġ huwa wieħed mill-applikazzjonijiet l-aktar komuni ta 'mudellar injezzjoni. L-ippakkjar użat għall-ikel u mhux ikel oġġetti huma prodotti bl-użu iffurmar injezzjoni.

L-ippakkjar jżomm il-prodotti sikuri u danni ħielsa matul it-tranżitu. Fl-2016, l-ippakkjar kien l-applikazzjoni iffurmar injezzjoni ewlenija ma domanda totali ta ' 43,385 kilotons .

 

Prodotti tal-kostruzzjoni

mudellar injezzjoni isib applikazzjoni wiesgħa fil-manifattura ta 'prodotti relatati mal-kostruzzjoni u l-industrija tal-proprjetà immobbli.injezzjoni vetrina iffurmar

Bl-użu tal-plastik għandha ħafna vantaġġi kif huwa eħfef minn injam u metal. Joffri wkoll il-vantaġġ distinti li jkunu riċiklabbli.

Uħud mill-prodotti l-aktar komunement użati fl-industrija tal-kostruzzjoni manifatturati mill iffurmar injezzjoni jinkludu ventijiet bjut, gaskits puġġaman, qafliet gverta, tieqa u komponenti qafas bieb eċċ