For those involved in product development, engineering, and other form-giving applications, rapid prototyping (RP) technology can offer an excellent deliverable for various applications. Prototyping can be used for concept generation, ergonomic testing, test fitting, functional testing and even small-batch production.

There are various rapid prototyping technologies available for use including Fused Deposition Modeling (FDM), Stereolithography (STL), Selective Laser Sintering (SLS), and 3D Printing. Each of these technologies has advantages and disadvantages.

Fused Deposition Modeling technology is marketed commercially by Stratasys, which also holds a trademark on the term. Like most other RP processes FDM works on an "additive" principle by laying down material in layers. A plastic filament or metal wire is unwound from a coil and supplies material to an extrusion nozzle which can turn on and off the flow. The nozzle is heated to melt the material and can be moved in both horizontal and vertical directions by a numerically controlled mechanism, directly controlled by a computer-aided design software package. In a similar manner to stereolithography, the model is built up from layers as the material hardens immediately after extrusion from the nozzle.

Stereolithography is an additive fabrication process utilizing a vat of liquid UV-curable photopolymer "resin" and a UV laser to build parts a layer at a time. On each layer, the laser beam encounters a part cross-section pattern on the surface of the liquid resin. Exposure to the UV laser light cures, or, solidifies the pattern traced on the resin and adheres it to the layer below.

Selective laser sintering is an additive rapid manufacturing technique that uses a high power laser to fuse small particles of plastic, metal, ceramic, or glass powders into a mass representing a desired 3D object. The laser selectively fuses powdered material by scanning cross-sections generated from a 3D digital description of the part on the surface of a powder bed. After each cross-section is scanned, the powder bed is lowered by one layer thickness, a new layer of material is applied on top, and the process is repeated until the part is completed.

READ  What You Should Know About Face Casting

3D printing is a unique form of prototype creation that isoted in traditional rapid printing technology. A three dimensional object is created by layering and connecting successful cross sections of material. 3D printers are generally faster, more affordable and easier to use than other additive fabrication technologies. While prototyping dominates current uses, 3D printing offers tremendous potential for retail consumer uses, especially because the cost of production is less than other methods, and the part build time is minimal. In the latest incarnations, 3D color printing is also available. This means that a part can be printed to represent the colors of the finished product, to show label concepts or requirements, or to indicate the results of stress analysis or other failure mode effects (FME) analysis.

For the most part, all rapid prototype systems require a 3D computer model to start the process. In most cases a significant amount of file preparation must be endeaken to get a file to generate a correct rapid prototype model.

As part of the innovation process, some companies may employ one or several rapid prototyping technologies in-house. However, being a new "cutting-edge" technology, many firms can make use of service bureaus to provide their rapid prototyping as the need becomes evident. Most service bureaus have detailed websites to market and serve their customers.

A handful of service bureaus are fairly large companies with numerous employees and locations. Many provide related services and technologies, such as tooling, industrial design, molding and production. However, service bureaus are typically small companies, and while they may be small, many of them are vertically integrated and can provide services from concept models to finished functional parts.

READ  Heavy Steel Fabrication Industry in India

Service bureaus tend to specialize in one or more areas such injection molding, casting, etc. Examine a company's portfolio or case histories on their web pages, or discuss previous projects with the company to try to better understand areas of particular expertise. Sculptors have also used the technology to produce complex shapes for fine arts exhibitions.

In the near future, rapid prototype technology will become more widespread and pervade even to the home. For now though, for timely and expert delivery, the use of a service bureau is the best way for most innovative companies, individuals and organizations.

Leave a Reply

Your email address will not be published. Required fields are marked *

Chat with us
Chat with us
Have you got question? Write to us!
Connecting...
Have you got question? Write to us!
Have you got question? Write to us!
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad